Penerapan Sistem Quality Control terhadap Hasil Produksi di CV Bie Hin Tailor
DOI:
https://doi.org/10.30640/abdimas45.v5i2.8192Keywords:
AQL Method, Product Defects, Production Quality, Quality Control, SOP ImplementationAbstract
This Field Work Practice (KKL) report discusses the implementation of a Quality Control (QC) system on production results at CV Bie Hin Tailor. The purpose of this activity was to determine the implementation of quality control, understand the use of the Acceptable Quality Limit (AQL) Sampling Plan method, analyze product quality based on inspection results, and identify product defects in suits and trousers. The methods used in this activity were observation and analysis of production data, Quality Control inspection results, rejected product data during the 2025–2026 period. Quality control was carried out using the AQL method based on the ANSI/ASQ Z1.4 standard through sample inspections to determine the acceptance or rejection of a production lot. The analysis results showed that during the January–June 2025 period, the percentage of good products was 83.4%, with a QC escape rate of 0.5%. During the July–December 2025 period, production quality improved, with the percentage of good products increasing to 95.5% and the QC escape rate decreasing to 0.4%. However, during the January–May 2026 period, the QC escape rate increased to 0.7%, even though the total production volume decreased. The implementation of AQL also showed that product defects were still found and required improvement. Overall, the Quality Control system at CV Bie Hin Tailor has been implemented and plays an important role in maintaining production quality. However, improvements in inspection accuracy, consistency, clearer implementation of Standard Operating Procedures (SOPs), and continuous evaluation are still needed to minimize product defects and improve production quality.
References
Alwie, rahayu deny danar dan alvi furwanti, Adi Bagus Prasetio, Roni Andespa, Politeknik Negeri Lhokseumawe, and Kata Pengantar. 2020. “Tugas Akhir Tugas Akhir.” Jurnal Ekonomi Volume 18, Nomor 1 Maret201 2(1):41–49.
Article, I. N. This. 2026. “Panduan SOP QC Gudang.” 1–19.
Aulia, Tresna, et al. 2022. Pengaruh Pemberian Tunkin Terhadap Kesejahteraan Personel Guna Meningkatkan Profesionalisme Di Akademi Angkatan Laut, SAINTEK : Jurnal Sains Teknologi dan Profesi AAL Vol. 15 No. 2, Desember 2022, Halaman : 176 - 197.
Aziz Sholeh, Abdul et. Al. 2024. Kompensasi Terhadap Motivasi Kerja Karyawan pada PT. Insolent Raya di Surabaya, Journal Of Management and Creative Business Vol. 2 No. 1 Januari 2024, Halaman : 82 - 96
Bambang S. Irianto, 2021. Kebijakan Poros Maritim Dan Strategi Ekonom Serta Keamanan Laut, Jurnal Justiciabelen Volume 4, No.1, p-ISSN: 2654-3419, e-ISSN : 2654-3311. Halaman : 1-10.
Bernadi, Reynold. 2020. “Perancangan Perbaikan Sistem Sampling Penerimaan Mutu Pada Proses Produksi Divisi Painting & Sticker PT . X.” 8(2):409–16.
Dewi, Rina, Zuhro, Diana, et. al (2024). Service Design Performance Based On Consumer Preferences. International Journal of Econmics and Management Sciences Vol. 1 No. 3 August 2024, Page 142-160, DOI : https://doi.org/10.61132/ijems.v1i3.131.
Diansari, Brillian Nur, Garnet Filemon Waluyono, and Fahar Fauzan. 2024. “Pengendalian Kualitas Produk Dengan Metode Statistical Quality Control ( SQC ) Di PT . XYZ.” 3(2):77–87.
Direktur, Presiden, Bie Hin, and Tailor Group. 2024. “Bie Hin Tailor , 94 Tahun Merajut Keanggunan Dan Inovasi Dalam Dunia Fashion.” 1–5.
Enny Istanti1), Bramastyo Kusumo2), I. N. (2020). IMPLEMENTASI HARGA, KUALITAS PELAYANAN DAN PEMBELIAN BERULANG PADA PENJUALAN PRODUK GAMIS AFIFATHIN. Ekonomika 45, 8(1), 1–10
Firdaus, Fikri, et al. 2021. Kualitas Produk dan Promosi Dalam Mempengaruhi Keputusan Konsumen Menggunakan Jasa Penyewaan Produk Alat Berat. Jurnal Akuntansi, Ekonomi dan Manajemen Bisnis Vol. 1 No. 3 November 2021, Page : 76-82.
Fitriyan, M., and Agus Salim. 2014. “Pengendalian Kualitas Dengan Metode Acceptance Sampling (Studi Kasus: AMDK ADENI Pamekasan).” Jurnal Teknik Dan Manajemen Industri 6(2):159–65.
Hin, Bie, Tailor Genap, Rayakan Warisan, and Kemanusiaan Lewat. 2025. “Bie Hin Tailor Genap 95 Tahun, Rayakan Warisan Kemanusiaan Lewat Panggung Dan Charity.” 1–4.
Istanti Enny et al. 2024. Service Design Performance Based On Consumer Preferences, International Journal Of Economics and Management Sciences Vol 1 No. 3 August 2024, Page 142 - 160.
Iwa Soemantri, Asep et al. 2020. Entrepreneurship Orientation Strategy, Market Orientation And Its Effect On Business Performance In MSMEs. Jurnal EKSPEKTRA Unitomo Vol. IV No. 1, Hal. 1-10.
Konveksi, Di, Zahra Busana, Erna Habibah, Agustin Sukarsono, and Oktavia Ayu Fadhilah. 2024. “Penerapan AQL ( Acceptable Quality Level ) Pada Proses Trimming Pakaian Seragam Sekolah.” 02(01):24–33.
Kristiawati, et al. 2019. Citra Merek Persepsi Harga dan Nilai Pelanggan Terhadap Keputusan Pembelian Pada Mini Market Indomaret Lontar Surabaya. Jurnal Ilmu Ekonomi dan Manajemen (JMM 17) Vol. 6 No. 2, September 2019, Hal. 27- 36.
Kumala Dewi, Indri et al, 2022 Peningkatan Kinerja UMKM Melalui pengelolaan Keuangan, Jurnal Ekonomi Akuntansi , UNTAG Surabaya, Hal ; 23- 36
Mahjudin, et. al. 2025. Analysis of Credit Marketing Strategy, Lending Procedures, and Service Quality on Customer Satisfaction of Rural Banks. Jurnal Ilmiah Manajemen Kesatuan, Vol. 13 No. 4 2025, Page : 2659 - 2672, DOI : 10.37641/jimkes.v13i4.3296.
Norajaba, Muhammad Xavieri, Yanuar Pandu Negoro, Teknik Industri, and Universitas Muhammadiyah Gresik. 2026. “No Title.” 9.
Patmi, Sri, et al. 2025. Manajemen Sumber Daya Manusia Stratejik. November 2025, Cetakan Pertama, Penerbit : Widina Media Utama. Hal. 1 - 232, ISBN : 978-634-246-35-7.
Peña-gonzález, Darwin, Nestor E. Caicedo-solano, and Roberto Torres-peña. 2024. “Enhancing Quality Control in Lot Reception : A Comparative Analysis of Innovative Attribute Acceptance Sampling Plans.” 17(3):681–97.
Pramono Budi,Istanti Enny, Daengs GS,Achmad, Syafi’i, Bramastyo KN,RM ,2023, Impact of Social Media Marketing and Brand Awareness on Purchase Intention in coffe shop culinary in Surabaya, International Journal of Entrepreneurship and Business Decelopment, Volume. 5 Number 6 November 2022, Page. 968 - 977
Purba, Bonaraja, et al. 2025. Teori Ekonomi Pendekatan Klasik dan Modern. Desember 2025, Cetakan Pertama, Penerbit : Yayasan Kita Menulis, Hal 1 - 181, ISBN : 978-634-260-118-1.
Rina Dewi, et al. 2020. Internal Factor Effects In Forming The Success Of Small Businesses. Jurnal SINERGI UNITOMO, Vol. 10 No. 1, Hal. 13-21
Salim Gazali et al. 2024. Ikan Nomei, Merdeka Belajar Kampus Merdeka, Halaman : 1 - 98
Salwa, Amelia Kurnia, and Muhammad Mashuri. 2021. “Evaluasi Rancangan Sampling Pada Tahap Incoming Quality Control Di PT. Genta Semar Mandiri.” Jurnal Sains Dan Seni ITS 9(2). doi: 10.12962/j23373520.v9i2.55542.
Sutopo, et al. 2021. Peranan Prinsip Konsistensi Dalam Metode Pengakuan Pendapatan Terhadap Laporan Laba Rugi Pada PT. INDO ZINC DIECASTING di Gresik. Jurnal Akuntansi, Ekonomi dan Manajemen Bisnis Vol. 1 No. 3 November 2021, Page : 83-92.
Tahir, Hasni Ria Asysyfa, and Suharto. 2013. “Analisa Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control (SQC).” Malikussaleh Industrial Engineering Journal 2(1):29–36.
Wang, Chien-chih. 2023. “Dynamic Acceptance Sampling Strategy Based on Product Quality Performance Using Examples from IC Test Factory.”
Wulandari, Eki, and Al Masruroh. 2024. “Penerapan Acceptable Quality Level ( AQL ) Dalam Tahapan Final Inspection Produk Garmen Di PT XYZ.” (2).
Zuhro Diana et al. 2024. Impact Of Measurement Of Service Quality Using The Servqual Method, Digital Innovation : International Journal of Management Vol. 1 No. 3 July 2024, Page 94-11
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Mahardika Bintang Surendra, I Gede Wiyasa MS, Rina Dewi, Achmad Daengs GS
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
